|Surface Treatment||Powder coated|
Main Shell : The main fabrication of the structural frame work shall be integral & all welded type to comprise of the bottom frame, overall frame work, internal, external cladding with insulation and other peripherals. Sloping self-draining roof and desired door-window, A/C openings etc.
Base Frame : The main bottom (Base) frame is fabricated and welded M S pressed steel channel sections/rolled steel channel sections, and all the inter connecting cross members shall also be of steel channels duly welded lengthwise & breadth wise and conveniently equispaced.
Flooring : 16 MM Thick Cement bonded Particle Board shall be fixed with suitable fasteners to the bottom frame.
Side & End Walls : The exterior cladding of the shell shall be of M S Pressed steel vertical corrugated sheets of 1.2mm and shall be welded to the bottom M S Channel frame, corner posts, top frame & roof frame. The corrugated version acts as stiffeners and increase strength to weight ratio & eliminates the use of any other vertical supports. All the gaps are sealed at the edges & at seams, bottom sills & will prevent ingress of insects, moisture etc.
Roof : The roof shall be of sloping type from the center towards the walls for efficient drain of rainwater and to avoid collection of dust leaves etc. The roof shall be made of 1.2mm thick plain MS. Steel sheets and is provided with adequately reinforced sections from inside for additional strength and this shall be able to comfortably resist loads.
Insulation : 50 MM Thick mineral glass wool/ Fiberglass resin bonded wool/ thermocole shall be provided on all sidewalls, end walls, roof with special adhesives.
Inner Paneling : 8mm thick Pre laminated boards shall be screwed on the sidewall internal ‘Z’ section/square tubes. All the vertical & horizontal corners and vertical joints of panels shall be fixed with beading patties. The internal paneling of the roof shall be of 4mm pre laminated boards with beading patties. The ceiling of the roof shall be suspended from inside on suitable ‘Z’ section / angle frame work.
Doors : Doors shall be of 6’6” x 3’. The shutter shall be opened inside. The main door shall be with MS Door of 30 mm thick filled with PU Foam and both sides will be painted with suitable color. These doors shall be fixed with heavy gauge M. S hinges & Hydraulic doors closer.
Windows : Windows of sizes as per the drawing wherever required shall be made from quality Aluminum anodized extruded section of suitable size and shall be of sliding type fitted with clear glasses. Mosquito nets shall be provided on suitable framework & anti pilferage MS grills shall also be provided.
Pretreatment & Painting : Epoxy paint 2 coats (white / Gray Color)
Electrical : All switches and sockets shall be of ISI mark quality.